Hi all. After work today I was in two minds as to whether to go out and see the passing of a steamer on the nearby West Coast Main Line. The engine was none other than "Flying Scotsman". The NRM's A3 Pacific was on a positioning move with her support coach from Keighley to East Grinstead, ready for a star turn at the Bluebell Railway over Easter. The engine was due to pass Nuneaton's Platform 5 at 15:21 and so I headed down to a spot on Marston Lane, not too far from our house. A gallery of around a dozen photographers had gathered to see "the Worlds most famous engine" fly by and no doubt Nuneaton Station itself was rammed. The local press had done all they could to advertise this movement which for most other engines would be pretty low key!
Running a minute or two early, 60103 passed us by with her support coach, providing a back drop to the yellow colours of the rapeseed in the field. She wasn't in sight for many seconds before she disappeared in the direction of Rugby. We had "Flying Scotsman" at Tyseley last September and it was nice to see her motoring along at speed. Although I've never really understood the indescribable level of love and affection that the public have for the engine, it is lovely to see such popularity following an important piece of our hobby. Everyone becomes a steam fan when it involves "Flying Scotsman"! Cheers all, Sam...
Wednesday, 12 April 2017
Sunday, 9 April 2017
Tyseley: The Real Thing - A Castle To Salisbury...
![]() |
| "A Castle On The Great Western Main Line" (Pic - D.Chandler) |
The telltale cloud of white steam rising steadily skyward immediately revealed 5043's position. She was now at the head of the waiting stock, simmering away on the middle road. She looked a real picture as first light came...
As usual with Tyseley trips, almost all of the preparation was carried out on the Friday and so there was little to do but board the Support Coach in readiness for departure. At 6:15am, 5043 burst into life, expelling reams of condensation forwards from her drain cocks. The upgrade push out of the yard gave the Castle something to think about on the damp rails. Propelling a lengthy 11-coach (10+GUV) load up the stiff bank to the signalbox is no mean feat! Once up at the box the road was then given for the Castle to drop down through the loop adjacent to the Tyseley site before climbing out onto the main line. 5043 then got into her stride on route to our first passenger pick-up at Solihull. It was unusual today to leave Tyseley in this direction, hence the lack of a Tyseley Warwick Road pick-up stop. Aboard the Support Coach, we were supping tea over a nice sausage sandwich as the Castle tore onward through the morning mist. Having picked up at Solihull there were further stops at Dorridge and Warwick Parkway before continuing southward towards Leamington Spa...
![]() |
| "Approaching Leamington" (Pic - D.Chandler) |
![]() |
| "On Route To Banbury" (Pic - D.Chandler) |
![]() |
| "Kennington - A Final Sprint To The Didcot Stop" (Pic - D.Chandler) |
I had a quick wander around the shed, amongst several of our passengers. Didcot has a great and varied fleet that includes Panniers, Prairies, Halls, a Castle, a Manor and even a King. The blue liveried 6023 "King Edward II" was sitting on the middle road. I saw this engine during her running in period at the GCR some years ago and was most impressed with the sight of her in action. She has since been cut-down to bring her into gauge for main line use but there are no signs of her venturing out just yet, despite being several years into her ticket. Its amazing just how big the Kings are. Though smaller in the wheel than the Castle, the King is a frightfully powerful machine...
| "Didcot's Caged Lion - 6023 King Edward II" |
| "The 'Earl of Mount Edgcumbe' Simmers At Didcot" |
![]() |
| "Under The Wires To Reading" (Pic - D.Chandler) |
With the GUV now empty of coal, 5043 departed Salisbury for a short turning move. Those of us remaining with the train took the opportunity to have a wash and a nice can of Coke. 5043 was watered by a tanker during the turning move and, as well as the tender, the GUV was replenished ready for the return run. The GUV allows us longer distances between water stops as it provides a far greater water capacity than the tender alone. After a sunny afternoon in the sidings watching the countless Class 158 units pass us by, 5043 propelled the stock back over into the station at around 4pm. Our departure was planned for 4:26pm and during this waiting time we decided to grab an ice cream from the cafe. The cooling taste was most welcome indeed in this warm weather: everyone else was in shorts whilst we had work boots and full overalls!
Right on time, the 1936-built 4-6-0 left Salisbury and began the return to Tyseley via the outward route. The nattering aboard the Support Coach included the usual mixture of putting the world to rights and a cross examination of various locomotive performances. Our next stop was Didcot where we were held for a few minutes before we got the road to continue to Oxford. There the engine was watered again before the final slog homeward. The sun was going down as we passed Kings Sutton...
![]() |
| "A Kings Sutton Castle" (Pic - D.Chandler) |
From Banbury the engine was climbing towards Leamington before commencing the climb up Hatton Bank. The Warwick Parkway stop resulted in an upgrade restart, with the 11-coach load hanging back like dead weight. However, the double chimney Castle soon got the train moving again and accelerated admirably towards Birmingham. The noise was something to behold as the Castle tore into the climb. Its amazing how much an engine moves about at high speed. I'd never realised before how much stress and strain is put on the various components when a heavy load is being dragged along at 70mph+. Its a completely different experience to preserved railway practise and is as near as you're ever going to get to "the real thing". Amazing...
![]() |
| "Roaring Through Hatton Station" (Pic - D.Chandler) |
| "10pm - A Castle At Rest" |
Its quite poetic really watching the 81-year old Castle simmering away in the shed after a long run like this. Back in the day this was all she would have known, day in, day out. These days steam engines have become celebrities in their own right. The amount of people that came out to see her today was staggering...they were everywhere. One guy was even spotted on the roof of his house taking a picture as we passed! Steam still has a massive draw and in particular main line steam where you can see them at work in their home setting. Its great...just, great. Thank you all for reading, thank you to David Chandler who once again sent in images for use in this post and thank you to Tyseley for another grand experience. To give you all an idea of the run today, click here for a video from Youtube. Cheers all, Sam...
Monday, 3 April 2017
CMES: Sunshine And Electric Things...
Hi all. After a very nice day on the NRM's T9 yesterday at Shack, today was a much more relaxed affair. Despite me not having ran my engines since early Summer last year, I am still a member of Coventry MES and therefore twice a year I am rostered to help on their Sunday afternoon running days for the public at their Ryton Pools base. I went to work this morning before heading to Ryton just after Midday. Ron had already got most of the stuff out as well as the stock marshalled for the two-train working that is now a common sight on the 5" gauge metals of the RPMR. The traction for today's services would be the two trusty electric engines: the Class 31 & 37 machines. It was the RPMR's first running day of the 2017 season and the public were out in force thanks to the sunny Spring weather. Services began running at around 12:45pm and ran until 4pm...
| "The 31 In Action In Fair Weather On A Passenger Run" |
| "Driving The Class 31 Co-Co (Not A1A) Battery Electric" |
Sunday, 2 April 2017
Shackerstone: Spring Time With The Greyhound...
![]() |
| "Getting Away from Shackerstone" (Pic - M.Creese) |
Hi all. The National Railway Museum's beautiful LSWR T9 4-4-0 has created quite a stir during its recent visit to Shackerstone. It has brought several enthusiasts and photographers to the Leicestershire line with the promise of antique Southern steam. I think it is therefore our privilege to have the opportunity to crew this express passenger engine during her holiday away from her Cornish base at Bodmin. Today myself & JB had been booked to man the engine on the Battlefield Line's first Green Timetable (5 trips) running day of the 2017 season. I arrived at the gates of Shackerstone at around 6:20am, with the birds singing loudly as if to warn each other of my presence. Having meandered down to the loco yard with my ever growing variety of kit in hand, I stumbled through the door into the gloom of the shed. As the lights came up, the T9 came into view in front of "Cumbria". I opened the roller door first, letting in a little more light...
Driver JB soon arrived and we started our day with the most important of tasks: making the tea. With a cuppa' in hand, I climbed up onto the engine to check the state of affairs. Opening the gauge glass cocks revealed a healthy 3/4 of a glass and the pressure gauge read 20psi. The warming fire had done its work and its remaining embers were easily scraped through the gaps in the firebars with the long iron. I then laid a bed of coal around the box before breaking up some pallet wood. JB threw the wood into the box at the back end before I lit some oily rags up on the shovel...| "The Ignition Rags" |
| "Anatomy of a Greyhound" |
Whilst I finished the oiling up, JB was dusting off the already polished paintwork. The engine looked smart as she simmered nicely outside the shed. The fire had brought the engine around fairly quickly, though she was pretty hot from her warming fire already. Our first train was scheduled for 11:15am...
| "Ready For Duty On Shackerstone Shed" |
The T9 got away from Shackerstone smartly. Once the chimney got warm and the steam circuit had expelled its morning condensation, the exhaust became crisper and the engine sounded beautiful. One thing I will say about this old engine is that her voice is something to behold. Its lovely. John worked the T9 gently on this first run, allowing everything to warm up at its own pace. Onlookers are often surprised when we explain that though an engine may have 160psi on the clock she is still 'cold' on the first run of the day. The Greyhound was having no trouble making steam, blissfully nudging the needle towards the red line all the way. We were soon running round at Shenton ready for the homeward trip. The day was going very well so far: very pleasant indeed...
The second run saw us a little late off Shackerstone for a variety of reasons beyond our control. All things were however well with the T9 as John got her on the move away from the Hedleys Crossing 10mph slack on the 12:30 trip to Shenton...
The Greyhound was roaming easily through Leicestershire...
During the 12:42 passenger stop at Market Bosworth I climbed down from the T9 to grab a shot of her at the head of the train. She is an attractive machine...
Market Bosworth Station has undergone some heavy engineering over the winter closed period. The track has been lifted and damaged sections of drainage replaced. This section has long suffered with hanging water and so the new drainage will hopefully improve matters. A new point has also been installed as the embryonic beginnings of a future passing loop. The engineering work has resulted in a "Dead Slow" slack being imposed on the section whilst it settles in. The T9 worked steadily over the new point throughout the day as we arrived and departed Market Bosworth...
During the first trip JB had ordered some breakfast from the Shenton cafe and this arrived on the footplate upon our arrival. Very tasty it was too...
Having run round and coupled back up, the T9 simmered away as we ate our breakfast and awaited departure with the 1:05pm trip to Shackerstone...
| "JB Tucks In" |
The 1:45pm departure would see a 'Footplate Pass' guest on board...
| "The 'Beast of Bodmin' With The 1:45pm Train" |
Thankfully our gentleman enjoyed his ride aboard the sole surviving Greyhound and went off happy. We then ran the engine round again in readiness for the 3pm departure. JB kindly said I could drive the remaining two round trips whilst he had a go at firing. I quote - "Out of my way then, let the dog see the rabbit!"...
| "The Road Ahead From Shackerstone" |
I was thankful, despite only having four coaches, to get the T9 "on the move" without slipping as this would have resulted in several cracks from JB! The 4-4-0 moved gracefully out of Shackerstone with pressure nearing the red line and the water up at 3/4 of a glass. Once under Barton Bridge you can get the engine underway and she sounds a treat. Its surprising how little regulator produces such an intoxicating beat at the chimney. You can then easily adjust the valve settings with a pull or push on the steam reverser. One of my favourite things about driving the T9 is its Gresham vacuum ejector - its great. These ejectors, to my mind, are some of the best ever fitted to steam engines and are fantastic in operation when they're set up right. Its a pleasure to drive this machine.
Having run round at Shenton and returned to Shack, we were soon on the front of the train again ready for our final departure of the day...
The weather for the day had been mostly sunny but there were a few fairly heavy rain showers which came and went. JB had had a lovely day...
Pulling gently out of Shackerstone it created much amusement for JB when I edged the regulator over that tiny bit too far and produced a 1/4 of a wheel slip. "First of the day, first of the day" he taunted through breathlessness created by mocking laughter. My excuse sticks with the rain shower we departed in! Once on the move the T9 was away. I'd love to see this engine with six or seven on...I bet she's a treat...
![]() |
| "The NRM's T9 Arrives At Shenton On The 4:15pm Train" (Pic - M.Creese) |
I'm not sure what is happening here as JB works the points at Shenton...
Having run round, Martin Creese caught me driving the T9 in to buffer up...
![]() |
| "Driving The T9" (Pic - M.Creese) |
The sun was shining as we departed Shenton on the last trip of the day. We did run into a little rainstorm as we left Market Bosworth but this cleared to reveal a colourful rainbow as we drew near to Hedleys. Arrival at Shackerstone was right on time and once the T9 was uncoupled we drew back behind No7 disc signal to await the road. With the dolly 'off' I drove 30120 up through Platform 1 road and through No11 points to reach the shed, coming to a stop just in front of "Cumbria" where we found the T9 this morning. It was then time to begin the disposal procedure. The fire was fairly dead but there was a little clinker to remove. The T9 has no rocking grate and the firebars are quite close together meaning that any broken clinker tends not to fall through. Thinking of the crew the next morning, we decided to paddle out any clinker. Paddling is by far the last thing you want to do after a full day on an engine but it needs to be done. The ashes are lifted out of the firebox and tipped into a barrow alongside the engine. Its heavy, sweaty and dusty work...
| "JB Snaps Me Paddling The Fire" |
With the boiler well filled, the fire deadened, the clinker removed and all of the necessary items isolated, we left the T9 to simmer away to herself for the night. It had been a very enjoyable day on the old Greyhound and I must thank JB for his company aboard the 1899-built veteran. It was a most enjoyable experience. This engine is lovely and I am thankful for the days I have done on her footplate. Shes a beautiful old gal'. Click here for a video by Nick Short of today. Thanks all, Sam...
Sunday, 26 March 2017
Statfold Barn: A Glorious Day On No19...
Hi all. Today the award winning Statfold Barn Railway held its first Enthusiasts Day of 2017. A grand total of 20 locomotives were planned to be in steam and the event would also see the debut of the recently restored Burton & Ashby tram and the Peckett "Liassic". I was rostered to drive the lovely 0-4-0 Hudswell Clarke saddle tank No19, built in 1914. I couldn't make the usual prep day yesterday due to work commitments and so arrived at Statfold at 5:40am this morning. Already several of the crew members were in attendance and had begun busying themselves with various tasks around the shed. No19 was found in the centre road, sparkling from a days polishing yesterday. Fireman Max was already on the footplate, lighting the fire with a good round of dry wood. The atmosphere on shed at Statfold during these early morning light ups is always enjoyable...
With so many engines in steam today, most services would be double-headed. No19 was paired with the visiting Kerr Stuart Sirdar Class "Diana", usually found on the Bala Lake Railway and owned by SBR Driver Phil Mason. Myself and Max prepped No19 in readiness for our 8:00am move off shed. The 0-4-0 carries the very accessible Walschaerts valve gear, with all of the components on the outside. The usual queue for the oil drums was enjoyed with several Drivers desperately willing the lethargic cylinder oil to show itself. No19 carries a mechanical lubricator on the drivers side for the cylinders. Most of the points require motion oil (a much thinner viscosity than the cylinder oil) with only the mechanical and the steam brake lubricator needing the latter. As you go round with your oil cans and your rag, the general make-up of the engine is also checked. You're looking for any pins, cotters, nuts or bolts that may be loose or even missing. The drivers eye is always keen to find something out of the ordinary...just in case. Thankfully, No19 was in good health (as per) and the morning prep went without hitch...
A day at Statfold generally starts with a very busy morning, followed later in the day by a very busy afternoon. These generally consist of the countless shunt moves required to get everything into place for the commencement of services and then getting it all ready to put away again in the evening. The actual 'running' part during the day is probably the most relaxed! When the call came for us to move, "Diana" hissed gently forward, tugging us into movement. The two engines descended the bank to the signalbox with their steam brake exhausts whistling away. We were then given the disc signal to steam up into the platform and couple to the waiting stock on Platform 2 road...
Once in position, the attentions of the Duty Officer turned to the next move on the traction list. We would be stationary now until around 9:30am. The usual Safety Briefing then took place outside the loco shed, with the general arrangements for the day set out in full. After the briefing we decided to go and get our traditional SBR breakfast: a cuppa' and a cob. This was enjoyed upon our return to No19...
The first passenger train of the day left slightly before us, hauled by 4 locomotives. This system eventually works out to get the token system up and running. Our pairing would be the next out, hauling another passenger set. The green double-act of "Alpha" and "Liassic" would tail us for the first trip of the day...
Steaming away from Oak Tree we descended the bank before heading to the balloon loop at New Road. We were held on the approach by a red flag, allowing the "Goose" railbus to depart along the High Level line...
With the "Goose" out of the way, our ensemble made some row as we got the train moving again into the balloon loop. Low Level trains are held here to allow the previous service to depart on the token. The train stabled in the platform at Cogan Halt will then wait for the next train to come down from Oak Tree before departing...
Upon our restart from Cogan Halt we struggled to get the engines to move. Both had near enough full pressure but the weight was just hanging back solid. A quick nudge from "Alpha" got us underway in the end, though we felt a brake had been left on initially. Leaving New Road, the climb of the bank to Oak Tree was, shall we say, "fairly audible!". No19 and "Diana" really tore into it with probably their heaviest train of the day. Two dead engines on the back makes for some real weight! Soon enough we were waiting at S9 signal: the Statfold Outer Home: for a green...
After a pleasant first run, our pair were uncoupled and turned on the table. As "Diana" doesn't have the usual Statfold choppers, a special coupling was joining her to No19. No19 then became the coupling engine so we had to run with the Kerr Stuart leading all day. This was no issue to us. Once turned we spent a little while on the shed before being signalled down into the headshunt adjacent to the garden...
"Max" and the Corpet soon came down on top of us...
There was such a wonderful array of locomotives out today: so much to see. "Max" is passed here by my favourite SBR engine; the beautiful Bagnall 4-4-0 "Isibutu". The green 4-4-0 is seen departing Statfold with the ex-L & B stock...
At this point we enjoyed yet another cup of tea. The tea was certainly flowing today, during every stop at Oak Tree and every stop at Statfold. Well done to the Tea teams! Our second trip was another passenger run and we soon found ourselves at the balloon loop awaiting our next path. Ben Joseph caught me looking for the next train...
Returning to Statfold once again I was caught checking the time...
The third train of the day was a freight working. Max drove this trip with me having a go at chucking the coal in. I was having a brilliant day...
We were soon arriving back and surrendering the token once again. I tell you what, we couldn't have asked for better weather for the March open day...
Statfold days go so quickly. As well as driving & firing the engines you spend your day drinking tea, watching the world go by and of course gassing with the countless people you seem to know. I spent my day chatting to almost everyone that passed by the engine. Max commented that I seemed to know everyone...I don't know what he means! We were soon back on shed after our third outing of the day...
After the third trip we did wonder if that was it for the day but at the last moment we had a final passenger working. Julian Birley: owner of "Alice" and "Winifred" at Bala: joined us on the footplate for this final trip and we had a pleasant chat about all things steam. The train is captured at the balloon loop. Max was on the handle for this run...
Returning to Statfold after the final run, we were uncoupled and then moved (via the turntable) into Platform 1 road behind most of the rest of the engines. We were now awaiting the 5pm Cavalcade and Whistle-Up. This was performed near the Tram Shed before the engines dropped down to the Roundhouse ready for disposal...
| "No19 Steams Up Behind 'Diana' Whilst 'Max' and 'Howard' Look On" |
A day at Statfold generally starts with a very busy morning, followed later in the day by a very busy afternoon. These generally consist of the countless shunt moves required to get everything into place for the commencement of services and then getting it all ready to put away again in the evening. The actual 'running' part during the day is probably the most relaxed! When the call came for us to move, "Diana" hissed gently forward, tugging us into movement. The two engines descended the bank to the signalbox with their steam brake exhausts whistling away. We were then given the disc signal to steam up into the platform and couple to the waiting stock on Platform 2 road...
| "Coupled Up & Ready To Go" |
The first passenger train of the day left slightly before us, hauled by 4 locomotives. This system eventually works out to get the token system up and running. Our pairing would be the next out, hauling another passenger set. The green double-act of "Alpha" and "Liassic" would tail us for the first trip of the day...
With a "Right Away" from the Guard and the correct signal given, we were "on the move". There was much hissing as we departed...
![]() |
| "Leaving Statfold" (Pic - J.Evans) |
"Diana" led us neatly out of Statfold and into the fields. Coasting downgrade into Oak Tree, the staff for the Statfold section was given up and a green flag received from the crossing. We would now proceed into the next section. "Diana"s driver Phil then turned around and said "need some help here, Sam" as his pressure slowly decreased. My reply came swiftly whilst opening the regulator on No19: "My god Max, can you believe it? Talyllyn men down the nick already and we're not even half way there!". There was much amusement which was captured by Ian Whitfield as we departed Oak Tree. One thing about footplate days is the good humour. Without that, it wouldn't be half as much fun...
![]() |
| "Leaving Oak Tree" (Pic - I.Whitfield) |
With the "Goose" out of the way, our ensemble made some row as we got the train moving again into the balloon loop. Low Level trains are held here to allow the previous service to depart on the token. The train stabled in the platform at Cogan Halt will then wait for the next train to come down from Oak Tree before departing...
Upon our restart from Cogan Halt we struggled to get the engines to move. Both had near enough full pressure but the weight was just hanging back solid. A quick nudge from "Alpha" got us underway in the end, though we felt a brake had been left on initially. Leaving New Road, the climb of the bank to Oak Tree was, shall we say, "fairly audible!". No19 and "Diana" really tore into it with probably their heaviest train of the day. Two dead engines on the back makes for some real weight! Soon enough we were waiting at S9 signal: the Statfold Outer Home: for a green...
![]() |
| "Waiting At S9 Signal" (Pic - M.Waldron) |
"Max" and the Corpet soon came down on top of us...
There was such a wonderful array of locomotives out today: so much to see. "Max" is passed here by my favourite SBR engine; the beautiful Bagnall 4-4-0 "Isibutu". The green 4-4-0 is seen departing Statfold with the ex-L & B stock...
At this point we enjoyed yet another cup of tea. The tea was certainly flowing today, during every stop at Oak Tree and every stop at Statfold. Well done to the Tea teams! Our second trip was another passenger run and we soon found ourselves at the balloon loop awaiting our next path. Ben Joseph caught me looking for the next train...
![]() |
| "Waiting The Road" (Pic - B.Joseph) |
![]() |
| "The Big Hand Points To..." (Pic - I.Whitfield) |
![]() |
| "Around The Loop With The Freight" (Pic - M.Waldron) |
![]() |
| "A Beautiful Day at Statfold" (Pic - J.Evans) |
After the third trip we did wonder if that was it for the day but at the last moment we had a final passenger working. Julian Birley: owner of "Alice" and "Winifred" at Bala: joined us on the footplate for this final trip and we had a pleasant chat about all things steam. The train is captured at the balloon loop. Max was on the handle for this run...
| "Final Trip at New Road" (Pic - Mark of SBR) |
A gang of fitters then took over the engines ready to dispose them. Us crews were sent off for tea...can't say fairer than that! All in all it had been another fantastic day at Statfold Barn. I must thank Max for his company aboard No19 and Phil for being such a good sport with "Diana". I must also thank all at Statfold Barn Railway for another great opportunity to volunteer with them and of course the various photographers who have kindly sent in images for use in this post. I am very grateful to you all. Roll on the next Statfold do which it just so happens is our "Giant Miniature Weekend". A family event aimed at all ages with well over 80 miniatures in steam plus plenty of action on the railway and other attractions too. Tickets available here for the May 6th/7th "GMW"
In extremely sad news, I am sorry to round off this post with the news that John Tomlinson: a young, keen SBR volunteer: passed away during the weekend. John's family are the owners of the Fowler Traction Engine "Elsa" which has been featured on here many times before. John was a very pleasant, knowledgeable and enthusiastic young man and it is extremely sad to say that he has left us at age 14. Whenever I saw John at rallies I was always impressed by his confidence with road engines, particularly for his young age. His love and passion for "Elsa" was also clear. My thoughts go out to John's family during this awful time. RIP John.
Thanks All, Sam
Subscribe to:
Posts (Atom)
















