Saturday, 16 August 2025

Going Great Central: 68067 - "Robert" The Galloping Bucket...

"A box van bucket, north of Quorn" (M.Tattam)
This morning it took all of my strength to drag myself from my bed, fumble down the stairs and load up the car in readiness for an 0500 book on at Loughborough shed. Getting up at 0345 is never fun, but it's worth it in the end! The occasion was the Great Central's 2025 'Railways at Work' gala, starring four steam locomotives and a couple of diesels. This interesting event showcases the changing railway scene of the 1960s, operating passenger and freight trains supported by demonstrations and reenactments appropriate to the period. Blurry eyed, I trudged along the ash lined approach to the engine shed in order to sign in and read the notices. I had been pleasantly surprised (rightly or wrongly) during the week to find that our booked steed: Standard 2 No78018: had been removed from the roster and replaced with the recently returned Hunslet Austerity. Here I capture my first view of her this morning...
Signed in and ready for turn No39 since passing as a fireman, I made my way back out to the 0-6-0 saddle tank as she waited patiently in front of the other Standard 2, No78019. I was very pleased to see that some kind hearted cleaner had left a barrow full of pallet wood at the foot of the cab steps, as well as some freshly doused paraffin rags up on the footplate. Entering the cab after ascending the steps, I noticed cleaner Phil beavering away on the cab roof...it's nice to be keen! The heat emanating from the doorplate confirmed that we wouldn't have long to wait for steam this morning. Immediately, any concerns I may have had about meeting our booked 0745 off-shed time on today's R2 turn melted away. Headtorch on, let's go...
The first job, as always, was to check the water level in the boiler which showed a good, healthy (and solid) glass. The saddle tank had been out on test yesterday after returning to the railway following some repair works, which I believe included a full set of new tubes. She was obviously good and tight as she'd lost next to no water overnight (though it still felt like night anyway!). With the boiler confirmed as being full of water, I opened the firehole doors and had a peek around inside the firebox. All was well and I was pretty impressed to see what looked like a brand new set of firebars. Doors shut, it was back down the steps and along to the front of the engine to check the smokebox. Same again: nothing to report. Back down to the floor I went and back along to the waiting barrow of wood. With the wood soon flung up into the cab, I climbed back up to have a poke around with the fire iron. The ashy remainder of yesterday's fire was quickly dispersed and it was time to prepare the new fire...
"Ignition"
The second the flaming rag entered the firebox, the 0-6-0 started singing away to herself. A few more lit rags were tossed into the firebox atop the recently added coal bed, followed by the rest of the dry wood. Soon enough I had a good blaze going and it was time to close the doors and leave the engine to get on with it. All around, the other three engines in service were coming to life. It's a great atmosphere on the shed on mornings like this, with nothing but the crackling of fires, the occasional crew titter and the odd clang of shovels to be heard. It's about as near as you'll get...
So who is "Robert"? This engine of course! This 1943-built Hudswell Clarke is one of Hunslet's once 485-strong class of 18" 0-6-0 Austerity saddle tanks. Due to them becoming the standard British shunting locomotive during WWII, their production was spread across different manufacturers. Hudswell Clarke built 50 of the 485, including this one delivered to the Ministry of Defence. In 1950, with her military service over, the then 'WD 75091' was bought by the National Coal Board and moved around a few collieries. It gained the name "Robert" in 1978 whilst at Bold Colliery. It was during this time that an immaculate "Robert" took part in the Rocket 150 event at Rainhill, cementing its then identity with many enthusiasts. It was finally withdrawn from NCB service in 1982 and entered preservation. It returned to steam at Loughborough in 2017, wearing a BR black livery and posing as a scrapped sister (BR No68067). She portrays this livery to resemble a member of the ex-LNER J94 type, which were a fleet of 75 Austerity's purchased from the war department and operated on the eastern network. Though many have criticised the application of these liveries to many a none-J94 (there's only two actual J94s in preservation), it does make them fit in more in an ex-main line setting like this. I think it looks smart. Despite the number though, many still know it as "Robert" and to be fair it's nice for it to have a name.

Even though today was my first ever turn with this Austerity, "Robert" was in fact one of the first engines I pushed a rag around at Loughborough after joining the steam department there in 2021. Since then the 0-6-0 has mostly been out and about on other railways, earning money towards its next overhaul: Butterley, Embsay and Llangollen, to name but three. The Austerity's are an incredibly useful and versatile machine, much like Hunslet's elder Fitzwilliam type. They've done brilliantly in both industry and in preservation and therefore are very much in demand as preserved line performers, particularly for midsized lines. It's nice to see "Robert" back 'home' though for now, bringing some industrial flavour to the place. The last Austerity I went on was the Furness Trust's "Cumbria", over the hill somewhere quite a few years ago. Having grew up with that well meaning poorly Peckett, I was looking forward to being back on what many would consider as an 'ignorant industrial'. I love the outward simplicity of these things: a useful tool built to do a job day in, day out. Not for them were the luxuries of a quick sprint to the West Country, more a filthy slog from a colliery to the exchange. Nobody could ever give enough credit for what industrials did for Britain.

Anyway, waffling over. With the fire burning well, driver Pete was going around the engine with the oil cans whilst I prepared our lamps and then got set to empty the ashpan. This is the real romance of steam: no poetry or rose tinted specs, just a steaming wet mass of ash and grime accompanied by the odd flaming ember. It's a filthy job, but you're going nowhere if you don't do it! With steam rising nicely, we managed to back off the pit to allow No78019 access. It was then time to wash up and change, in readiness for the off. Our first move at 0825 was a light engine trip on the up to Quorn. It's always odd looking back and seeing no train!...
Having come to a stand in the up platform at Quorn, the road was reset to the north of us and a green aspect showed on the mechanical colour light signal. Having crossed over behind the ground discs, the road was given for us to set back bang road, through the down platform and into the lie-by. Here we collected the box van train but had around 30 minutes to wait until our northward departure. Pete elected to grab us a cuppa' from the NAAFI, which was most appreciated...
Whilst Pete was away grabbing the brews, I managed to grab this shot of the Austerity's typically industrial cab. I tend to wear gloves pretty much all the time these days (too many lessons learnt from burns gone bad in the past) but particularly on this, everything was stinking red hot. Note the added luxury of the fireman's seat...
"The footplate of Robert"
Right on time, we departed Quorn on the down with our rumbling train of box vans. Having passed Martyn near Quorn's down section (see his capture used as the title image), Pete shut off and allowed the engine to drift towards Loughborough on the steady downward grade. I was surprised how well it rode...
For an industrial there were some neat little additions on this engine: a slacking hose and pan spray to name two. However, I really liked the set up of the steam brake using an LMS combination brake valve. Just like a 3F or even the 8F, the combination brake controls both the vacuum brake for the train but also the steam brake on the locomotive. Most people who do up an industrial tend to just let the train do the braking, but this way is far better and prevents the snatching. In addition, the typical Austerity steam brake set up remains operational, with the usual linkage across the top of the boiler on the cab spectacle plate. With the box vans stabled in Loughborough's down loop, we were soon joined by "Witherslack Hall" for a light engine move, out to the totem. This odd little pairing is captured waiting for the road in platform two...
Once at the totem the two engines were uncoupled and the younger 4-6-0 moved away to take over our box vans for the next departure. We meanwhile awaited our shorter 'pick up goods' which would form our 0955 working. But it wasn't to be. Something had gone off up the line, causing a delay of around 40 minutes if memory serves. All we could do meanwhile was wait, with the free steaming Austerity keen to blow off despite a very quiet fire. It does come to a point where you need to add something just to keep the flames there! Here, "Robert" waits alongside the NRM Class 37...
Eventually we got the road to depart and left Loughborough in a cloud of smoke and steam. The engine pottered nicely towards Quorn, keeping to the GCR's goods train speed limit of 20mph. I was careful not to over fire as I knew we'd be sat in Quorn's up reception south (the turntable road) for quite some time. The layover was to allow one of the many demonstrations to take place. This interesting playlet, performed entirely by volunteers, portrayed the typical railway goods yard and featured not only the loading of wagons but also trespassing young enthusiasts, anti-Beaching protesters and the old bill. It was an interesting and quirky little watch which the onlookers definitely appeared to enjoy. "Robert" meanwhile simmered quietly behind the wagons, with the displayed lamp code reflecting our class 7 freight status...
Soon enough we were given our 10-minute warning prior to our departure. I made up a fair fire and decided to see how the Austerity would do. We were only going a couple of miles, just to Rothley (via Swithland of course, though we would be on the main) so I didn't want to overdo it. In the end the Austerity romped along with steam to spare and plenty of water in the boiler...I just wish we could have continued to Leicester! At the brook the engine was uncoupled as our train was being taken over by the waiting Hall. The Austerity then had around 40 minutes in the carriage sidings whilst we awaited our return working: the local passenger. Here, we prepare to depart Rothley on the down with that very train. We didn't have far to go just now...
And here she is, waiting for 25 minutes in Swithland's down loop...
The GCR galas are about recreating the experience of the main line as much as possible and therefore, local trains being looped for express trains definitely fits the bill. We were soon overtaken by a spritely No78019 and, once she'd cleared the section, the road was set for us. It wasn't long before we were romping over Swithland on the down, at line speed. I was impressed with how well this old gal' went...
Martyn caught us again on the approach to Rabbit Bridge, going well...
"Approaching Rabbit Bridge" (M.Tattam)
I really enjoyed the run back and was a little disappointed that we didn't have a full Leicester working to do. However, I was still pleased that I'd succeeded in my first efforts aboard "Robert". God knows when I'll get it again (if ever), so glad I finally have. It was a pretty much faultless morning, apart from some minor issues with the displacement lubricator which was overfeeding so needed isolating and refilling a couple of times. However, with work having been completed on the front end, the more oil the better I'd say. Here, No68067 waits patiently on the shed whilst her lubricator is refilled following crew swap. I really like it...
"Job done"
I must thank Pete for a very pleasant (and unexpected) morning on the Austerity and of course the GCR roster clerks who continue to give me turns. Well done to all who put on 'Railways at Work' 2025. Thanks to the smattering of people who continue to read this blog also. I write it because I like to (when my extremely limited time window allows) but if even one person reads it and takes pleasure from it, that's great. If nobody reads it, who cares? That's all for now then. Ciao ciao.
The views and opinions expressed in this blog are merely personal and do not in any way reflect the views and opinions of any other person, group or organisation.

1 comment:

Anonymous said...

Really cool, love these diary posts you do!